Wood Collection

2000 Series

Previous Image
Next Image

info heading

info content


WOOD COLLECTION SPECIFICATIONS

SpecificationDetails
Trim Options, Paint Grade⅝” Extira (standard) bonded to the facing with concealed fasteners.
Trim Options, Stain GradeClear western red cedar, select tight knot cedar, mahogany, Douglas fir, Ipe redwood, or any other available materials as specified.
Color Options, Paint GradeGray factory prime.
Color Options, Stain gradeUnfinished.
Construction TypeShiplap meeting rails for superior strength and better sealing against wind, rain and snow.
Windows⅛” DSB (standard) stopped and sealed in place. However, many other types of glass are available and optional (please specify).
Insulation1 ⅜” CFC-free expanded polystyrene insulation
R-value6
DimensionsSection widths available in ¼” inch increments up to 22 feet wide. Door heights available in ¼” inch increments up to 16 feet.
Fire-Rating Testing InformationSee more info on our Fire Rating page.
Wind Load Testing InformationSee more info on our wind load testing page.
Warranty DetailsSee our warranty page.

HARDWARE SPECIFICATIONS

SpecificationDetails
Track2” industrial grade galvanized angle-mounted verticals and horizontals - 2LC-6” low headroom clearance (standard). Standard lift 2SC-15” radius also available and can be used depending on overhead clearance and section height. 3” track is also available.
HingesSingle car under 12’ wide, single-end 11 gauge graduated galvanized. Double car 12’ wide and over, double-end 11 gauge graduated galvanized.
Rollers2” nylon 10 ball-bearing commercial (single car = short stem, double car = long stem)
Struts3” galvanized struts for all single and double-wide doors.
Counterbalance10,000 cycle torsion springs, galvanized aircraft cable with minimum 8-to-1 safety factor. Cast aluminum cable drums, 1” diameter torsion shaft/tube. Doors under 650 pounds = 11 gauge tube. Doors 650 pounds and over = solid core steel shaft (keyed) and coupled if exceeding 151” in length.
FastenersCadmium-plated fasteners (standard) for on-door hardware and securing tracks to jambs. All hinge fasteners are factory installed with bolt heads concealed beneath the overlay (concealed bolts).
OperationManual push-up (standard) - no lock assembly is supplied. Electric operation recommended for best possible operation.

FOR ARCHITECTS

Carriage House Door Company is known for its professional and collaborative approach, working extensively with home designers and building architects to customize its wooden garage doors and entrance gates exactly to customer expectations. Our engineers design each door to precise scale, furnishing complete design packages, specifications, and material call-outs.

View and download the Carriage House library of materials designed specifically for architects by logging in below.

FACING OPTIONS

Clear western red cedar, select tight knot cedar, mahogany, Douglas fir, Ipe redwood, black walnut, reclaimed barnwood, Burmese teak, shou sugi ban, contemporary composite, or any other available materials as specified. Plywood - ⅜” or ⅝” Breckinridge plywood, ½” Joubert plywood, marine mahogany plywood, ½” MDO plywood on paint-grade doors (note: MDO plywood is paint-grade only, no stain). Other custom plywood options available upon request.

CLEAR HEART REDWOOD FACING

CLEAR HEART REDWOOD

White Mohogany Facing

WHITE MOHOGANY

VERTICAL GRAIN DOUGLAS FIR

VERTICAL GRAIN DOUGLAS FIR

VERTICAL GRAIN CLEAR WESTERN RED CEDAR

VERTICAL GRAIN CLEAR WESTERN RED CEDAR

SHOU SUGI BAN

SHOU SUGI BAN

SAPELE MAHOGANY

SAPELE MAHOGANY

RECLAIMED REDWOOD

RECLAIMED REDWOOD

IPE

IPE

Contemporary Collection Garage Door

CONTEMPORARY COMPOSITE

RECLAIMED BARNWOOD

RECLAIMED BARN WOOD

BURMESE TEAK

BURMESE TEAK

Koa-wood-1

KOA WOOD

FIJI MAHOGANY

FUJI MAHOGANY

BLACK WALNUT WIRE BRUSHED

BLACK WALNUT WIRE BRUSHED

Macassar-Ebony-wood-1

MACASSAR EBONY

GLASS OPTIONS

Clear Glass Option

CLEAR OVER CLEAR

REED GLASS OPTION

REEDED GLASS

GREYLITE GLASS OPTION

GREYLITE #2

GREY OVER SATIN GLASS OPTION

GREY OVER SATIN

NEW GERMAN ANTIQUE GLASS OPTION

NEW GERMAN ANTIQUE

MACHINE RESTORATION GLASS OPTION

MACHINE RESTORATION

CLEAR SEEDY

CLEAR SEEDY

ROUGH ROLLED GLASS OPTION

ROUGH ROLLED

SATIN ETCHED GLASS OPTION

SATIN ETCHED

SEEDY REAMY GLASS OPTION

SEEDY REAMY

WHITE LAMINATE GLASS OPTION

WHITE LAMINATE

WISSMACH SEEDY GLASS OPTION

WISSMACH SEEDY

BRONZE GLASS OPTION

BRONZE

HAMMERED GLASS OPTION

HAMMERED

HARDWARE OPTIONS

Below are a few hardware options available for our doors. For more options, please contact us.

VIRGINIA DOOR KNOCKERS

VIRGINIA DOOR KNOCKERS

Santorini Nail Spike and Knockers

SANTORINI NAIL SPIKES & KNOCKERS

Barcelona Knockers

BARCELONA KNOCKERS

BARCELONA HANDLES

BARCELONA HANDLES

HAMMERED COPPER KNOCKERS

HAMMERED COPPER KNOCKERS

Rocky Mountain Clavos and Knockers

ROCKY MOUNTAIN CLAVOS & KNOCKERS

SPECIFICATIONS

WOOD COLLECTION SPECIFICATIONS

SpecificationDetails
Trim Options, Paint Grade⅝” Extira (standard) bonded to the facing with concealed fasteners.
Trim Options, Stain GradeClear western red cedar, select tight knot cedar, mahogany, Douglas fir, Ipe redwood, or any other available materials as specified.
Color Options, Paint GradeGray factory prime.
Color Options, Stain gradeUnfinished.
Construction TypeShiplap meeting rails for superior strength and better sealing against wind, rain and snow.
Windows⅛” DSB (standard) stopped and sealed in place. However, many other types of glass are available and optional (please specify).
Insulation1 ⅜” CFC-free expanded polystyrene insulation
R-value6
DimensionsSection widths available in ¼” inch increments up to 22 feet wide. Door heights available in ¼” inch increments up to 16 feet.
Fire-Rating Testing InformationSee more info on our Fire Rating page.
Wind Load Testing InformationSee more info on our wind load testing page.
Warranty DetailsSee our warranty page.

HARDWARE SPECIFICATIONS

SpecificationDetails
Track2” industrial grade galvanized angle-mounted verticals and horizontals - 2LC-6” low headroom clearance (standard). Standard lift 2SC-15” radius also available and can be used depending on overhead clearance and section height. 3” track is also available.
HingesSingle car under 12’ wide, single-end 11 gauge graduated galvanized. Double car 12’ wide and over, double-end 11 gauge graduated galvanized.
Rollers2” nylon 10 ball-bearing commercial (single car = short stem, double car = long stem)
Struts3” galvanized struts for all single and double-wide doors.
Counterbalance10,000 cycle torsion springs, galvanized aircraft cable with minimum 8-to-1 safety factor. Cast aluminum cable drums, 1” diameter torsion shaft/tube. Doors under 650 pounds = 11 gauge tube. Doors 650 pounds and over = solid core steel shaft (keyed) and coupled if exceeding 151” in length.
FastenersCadmium-plated fasteners (standard) for on-door hardware and securing tracks to jambs. All hinge fasteners are factory installed with bolt heads concealed beneath the overlay (concealed bolts).
OperationManual push-up (standard) - no lock assembly is supplied. Electric operation recommended for best possible operation.

ARCHITECTURAL INFO

FOR ARCHITECTS

Carriage House Door Company is known for its professional and collaborative approach, working extensively with home designers and building architects to customize its wooden garage doors and entrance gates exactly to customer expectations. Our engineers design each door to precise scale, furnishing complete design packages, specifications, and material call-outs.

View and download the Carriage House library of materials designed specifically for architects by logging in below.

FACING OPTIONS

FACING OPTIONS

Clear western red cedar, select tight knot cedar, mahogany, Douglas fir, Ipe redwood, black walnut, reclaimed barnwood, Burmese teak, shou sugi ban, contemporary composite, or any other available materials as specified. Plywood - ⅜” or ⅝” Breckinridge plywood, ½” Joubert plywood, marine mahogany plywood, ½” MDO plywood on paint-grade doors (note: MDO plywood is paint-grade only, no stain). Other custom plywood options available upon request.

CLEAR HEART REDWOOD FACING

CLEAR HEART REDWOOD

White Mohogany Facing

WHITE MOHOGANY

VERTICAL GRAIN DOUGLAS FIR

VERTICAL GRAIN DOUGLAS FIR

VERTICAL GRAIN CLEAR WESTERN RED CEDAR

VERTICAL GRAIN CLEAR WESTERN RED CEDAR

SHOU SUGI BAN

SHOU SUGI BAN

SAPELE MAHOGANY

SAPELE MAHOGANY

RECLAIMED REDWOOD

RECLAIMED REDWOOD

IPE

IPE

Contemporary Collection Garage Door

CONTEMPORARY COMPOSITE

RECLAIMED BARNWOOD

RECLAIMED BARN WOOD

BURMESE TEAK

BURMESE TEAK

Koa-wood-1

KOA WOOD

FIJI MAHOGANY

FUJI MAHOGANY

BLACK WALNUT WIRE BRUSHED

BLACK WALNUT WIRE BRUSHED

Macassar-Ebony-wood-1

MACASSAR EBONY

GLASS OPTIONS

GLASS OPTIONS

Clear Glass Option

CLEAR OVER CLEAR

REED GLASS OPTION

REEDED GLASS

GREYLITE GLASS OPTION

GREYLITE #2

GREY OVER SATIN GLASS OPTION

GREY OVER SATIN

NEW GERMAN ANTIQUE GLASS OPTION

NEW GERMAN ANTIQUE

MACHINE RESTORATION GLASS OPTION

MACHINE RESTORATION

CLEAR SEEDY

CLEAR SEEDY

ROUGH ROLLED GLASS OPTION

ROUGH ROLLED

SATIN ETCHED GLASS OPTION

SATIN ETCHED

SEEDY REAMY GLASS OPTION

SEEDY REAMY

WHITE LAMINATE GLASS OPTION

WHITE LAMINATE

WISSMACH SEEDY GLASS OPTION

WISSMACH SEEDY

BRONZE GLASS OPTION

BRONZE

HAMMERED GLASS OPTION

HAMMERED

HARDWARE OPTIONS

HARDWARE OPTIONS

Below are a few hardware options available for our doors. For more options, please contact us.

VIRGINIA DOOR KNOCKERS

VIRGINIA DOOR KNOCKERS

Santorini Nail Spike and Knockers

SANTORINI NAIL SPIKES & KNOCKERS

Barcelona Knockers

BARCELONA KNOCKERS

BARCELONA HANDLES

BARCELONA HANDLES

HAMMERED COPPER KNOCKERS

HAMMERED COPPER KNOCKERS

Rocky Mountain Clavos and Knockers

ROCKY MOUNTAIN CLAVOS & KNOCKERS

Scroll to Top